3D printable model of Claude's Crest of Riegan, used in Failnaught. 53mm in diametre, can be resized to fit needs but wouldn't recommend going below 45mm as there might be some lost detail. Comes with 2 different depths: Large (titled lorge) 24mm deep, and Small (titled Smol) at 20mm deep.

has a button cell battery holder/space modelled into them, and space for 5x10x5mm magnets if being detachable is from the rest of the prop is desired. Files are in STL. My display pictures were printed in PETG at 02mm layer heights on an Ender 3 and in Transluscent Red 405nm resin on the Elegoo Mars, I found the resin printed version gave the best results detail-wise.Please do not resell the model. Made from designs from Fire Emblem Three Houses