* This is a two piece product, the "IN" .stl file (Fan Side) is shown here. To see the "OUT" .stl file, please go here: http://www.cgtrader.com/free-3d-print-models/hobby-diy/electronics/nps-700-power-supply-mounting-bracket-out.

These are mounting brackets for the 12 Volt 700 Watt Dell NPS-700 AB A Poweredge server power supply. This model is designed to be for basic hobby or crypto currency mining rig power supplies that may already have wires soldered directly to the Molex connector on the supply. The bracket for the fan side includes a fan protection guard, air forcing cones, and a slot for the Molex connector. The AC input side has the same mounting foot print as the fan side, and has a hole for one 3 mm Allen head screw and nut. This screw head serves as the pin for the latching mechanism that comes with the supply to be used. When combined with the matching Molex socket (part # 87668-2004), the design allows for easy swapping of power supplies with out messing with wires. The hole pattern that the compete set up will mount to is 108 mm X ~271.5 mm, and can accept up to 8 mm bolts.