The mold is intended for the tire manufacture from silicone or similar flexible material in scale 1:25. It consists of 2 parts: top and bottom part. Each part can be 3D printed without supports.

Mold dimensions:

• diameter – 80 mm
• height – 30 mm

Tire dimensions:

• outer diameter – 40 mm
• overall width – 20 mm
• inner diameter – 18 mm

If you want a different wheel size, simply scale the mold.

The bottom mold part has 5 special bosses and Top mold part has 5 special holes to guide mold parts in the closed state. Also, there are 4 slots for better opening with a screwdriver or similar instrument.In the Top mold part are 4 small holes for material injection.Both mold parts have 4 holes with diameter 6 mm for bolting it in closed state.Note! Only the mold! This is not a tire!