Kawaii Cow - Alien 3D print model

Print Setting info:

STL and 3MF files are included. If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

*Print-in-Place, No supports needed.

*Multicolor 3MF

*0.2 Layer height (Use 0.12 or 0.16 layer height for better quality)

*10%-15% Infill (I recommend Gyroid, Honeycomb or Grid)

*3 Walls (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

*Make sure you have good adhesion.

*I tested this model on scale of 50% to 200%, I do not suggest smaller than 50% for the model. ( I printed it in 50% scale )

Happy Printing :)