Cool cat interactive toy, it shakes its head, turn on music, push its head and it will shake its head in time with cuteness. Also, this toy agrees with everything and agrees with everything, this greatly bribes trust in this toy.The dimensions of this model are: height 122.08 mm, width 74.46 mm, length 65.02 mm. The head should be printed hollow with thin walls. I printed on an FDM printer with a wall thickness of 1 line, with a Heroid infill of 0.002%, without supports, you can put supports at your discretion. I made the adhesion a skirt in 20 lines, the distance to the skirt is 0 mm, you can do the adhesion at your inspection, as you like. The head by weight turned out to be 6-7 grams, a little more weight needs to be put in an empty pendulum, for me it was 3 coins with a diameter of 25 mm and a weight of about 2 grams. There are no special recommendations for the body, I printed both with and without supports, without supports I had sagging threads between my legs, under my butt. If you print the pendulum with a load, then set the filling to 100%. And may the force of 3D printing be with you.