Christmas Special Cute little Boo X Reindeer.

Note : There are Two available versions of the model: Normal one and a KC one where KC stands for Keychain. You can resize the normal model howevere you want but please ignore resizing the KC one. ( But if you want to scale the KC please assure to scale the negative part also according to the model.)

Make sure to upload a make after printing, I'll love to see them.

Happy Printing:)

3D printing settingsPrint Setting info:

STL and 3MF files are included. If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

Print-in-Place, No supports needed.

Multicolor 3MF (Compatible with Bambu Studio)

0.2 Layer Height ( Use 0.12 or 0.16 layer height for better quality

10%-15% Infill (I recommend Gyroid, Honeycomb or Grid)

3 Walls (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

Make sure you have good adhesion.

I tested this model on scale of 50% to 200%, I do not suggest smaller than 60% for the model. ( I printed the Keychain version of this model at 100% Scale )

Happy Printing :)