Reshaped Build Strike Gundam, the main character MS in animation [GUNDAM Build Fighters​].

All joints are movable, and no glue is required for assembling.

The whole parts are separated into four groups, so you can either pick different color filaments to print or coloring them according to your preference.

The assembly video is available here:https://youtu.be/n61xRIjYf9s

And the instruction manual is available here:https://reurl.cc/0jnlO6

###PRINTING TIP####All parts are checked to make sure they are tight enough for playing. however, tolerance always exists because of the difference between printing machines and filament.

So if you find some of the parts are too loose or too tight, please try to print it larger or smaller (102%, or 98%). It might help.

All parts are placed in proper orientation in order to maximize the strength of the filament. Suggest using default orientation to print.

The printing time is about 60hr(main robot +equipment), the support base is about 8 hr.###################

Enjoy the assembling!

3D PRINTING SETTINGSJoint part:(almost are black).12mm height.4mm width20% fill rateshell width: 1.2mm

default part:(body).12mm height.4mm width20% fill rateshell width: 0.8mm

light weight part(gun, jetpack, saber, shield).12mm height.4mm width10% fill rateshell width: 0.4mm