BeastBound Guardians - Anthro Warrior Collection 3D print model

Meet the BeastBound Guardians, a lineup of 16 fierce anthropomorphic warriors—from armored rhinos and cyber-gorillas to amphibious knights and soaring avian sentinels. Each full-body model is delivered as a single optimized mesh, ready for slicing and printing without assembly hassles.

These designs were born from the creative spark of AI-powered 3D generators and then polished by an artist’s hand, combining cutting-edge procedural creativity with human flair. Perfect as desk ornaments, tabletop miniatures, or shelf-king guardians, they’ll bring character and epic style to any collection.

*Recommended Print Settings*

• Printer type: FDM / FFF
• Material: PLA (standard or matte), PETG for added toughness
• Nozzle: 0.4 mm
• Layer height: 0.15 – 0.20 mm
• Infill: 15 – 20 % (grid or gyroid)
• Supports: Light tree/support touchups under arms and jaw overhangs
• Build plate temp: 60 °C (PLA) / 75 °C (PETG)
• Nozzle temp: 200 – 210 °C (PLA) / 230 – 245 °C (PETG)
• Bed adhesion: Brim (3–5 mm) or glue stick

*Post-Processing & Painting*

• Gently remove supports and sand with 200–400 grit.
• Apply a thin primer to reveal any layer lines.
• Hand-paint with acrylics or airbrush for vibrant details.
• Seal with matte or satin varnish to protect your finish.

**AI DISCLOSURE**This collection was co-created with AI—leveraging generative 3D tools for rapid concept iterations—then refined by hand to ensure clean topology, printability, and that “wow” factor.