Introducing the Zen Chameleon! This captivating 3D print-ready model embodies tranquility and modern design, featuring a chameleon curled in a peaceful, minimalist pose. Its smooth, geometric lines and simple, elegant form make it a perfect decorative piece for any contemporary space. Whether for your desk, bookshelf, or as a unique gift, this chameleon is designed for easy FDM and Resin printing, offering a satisfying build experience and a beautiful finished result.Setting,Recommended Value / Detail

• Machine Type,FDM (Fused Deposition Modeling) or Resin (SLA/DLP)
• Material,FDM: PLA (Excellent for detail and smooth finish). Resin: Standard Grey/White (Superb fine detail).
• Nozzle Size (FDM),0.4 mm (Standard)
• Layer Resolution,FDM: 0.12 mm (High Detail) or 0.08 mm (Ultra Fine for best curves). Resin: 0.05 mm (Standard).
• Infill Density (FDM),10-15% (Sufficient for decorative use)
• Print Speed (FDM),30-50 mm/s (Slower speeds enhance surface quality on curves)
• Supports,Minimal to No Supports. The model is largely self-supporting. A few small supports might be needed for the underside of the 'chin' if FDM printing. Check your slicer preview carefully.
• Raft/Brim,Brim (FDM) recommended for stable bed adhesion.
• Estimated Print Time,FDM: Approx. 6-10 hours (at 0.12mm). Resin: Approx. 2-4 hours (at 0.05mm).

• Assembled Size,100 mm (H) x 120 mm (W) x 80 mm (D) (Approximate - Scalable)Post-Processing Steps:

  Support Removal: If any supports were used, carefully remove them. The model's smooth surfaces should make this straightforward.

  Sanding (FDM): For a truly pristine finish, very light sanding with 220-400 grit sandpaper can smooth any subtle layer lines. Follow with finer grits if desired.

  Curing (Resin): Wash and post-cure according to your resin manufacturer's instructions.

  Finishing (Optional): This model looks stunning in a single color, but can also be primed and painted for custom looks. The eye slots are perfect for adding a contrasting color!

Assembly Guide:

This model is a single-piece print and requires no assembly.