Bring a touch of sophistication and abstract beauty to your desk or shelf with the Equus Bust. This model captures the powerful grace of a horse in a sleek, minimalist style reminiscent of a modern chess knight piece. Optimized for both FDM and Resin 3D printing, the clean lines and gentle curves ensure a stunning finished print that requires minimal post-processing. Perfect as a decorative piece, an artistic gift, or a standout element in your home decor.

• Setting,Recommended Value / Detail
• Machine Type,FDM (Fused Deposition Modeling) or Resin (SLA/DLP)
• Material,FDM: PLA (Easy to print, good surface finish) or PETG (Durable). Resin: Standard Grey/White (High detail).
• Nozzle Size (FDM),0.4 mm (Standard)
• Layer Resolution,FDM: 0.12 mm (High Detail) or 0.08 mm (Ultra Fine). Resin: 0.05 mm (Standard).
• Infill Density (FDM),10-15% (Sufficient for decorative use)
• Print Speed (FDM),40-50 mm/s (To ensure smooth curves)
• Supports,Required. Use Tree Supports (FDM) or Light/Medium Auto Supports (Resin) only under the chin/muzzle area and the inner curve of the neck.
• Raft/Brim,Brim (FDM) recommended for best bed adhesion on the base.
• Estimated Print Time,FDM: Approx. 10-15 hours (at 0.12mm). Resin: Approx. 3-5 hours (at 0.05mm).

• Assembled Size,180 mm (H) x 120 mm (W) x 80 mm (D) (Approximate - Scalable)Post-Processing Steps:

  Support Removal: Carefully clip and peel away supports. Because of the model's smooth surfaces, remove supports slowly to prevent gouging.

  Sanding (FDM): Light sanding with 220-400 grit paper will significantly smooth any layer lines, especially on the large curved surfaces.

  Curing (Resin): Wash and post-cure according to your resin manufacturer's instructions.

  Finishing: Apply a filler primer before painting for a flawless, cast-like appearance.

Assembly Guide:

This model is a single-piece print and requires no assembly.