Snowman decorative christmas sculpture 3D print model

The snowman is a slender and charming figure, with a conical body that tapers slightly at the base.

He wears an elegant black top hat with a vibrant red ribbon and a red and white striped scarf, which adds a festive touch to his look.

His eyes are small black dots, and he has a yellow carrot-shaped nose, giving him a friendly and warm expression.

Red gloves adorn his hands, and three black buttons run down his body, completing his Christmas attire.

3D printing settingsSlicer Software: CHITUBOX V1.9.3Layer Height: 0,05 mmBottom Layer Count: 8Exposure Time: 2,5 sBottom Exposure Time: 80 sTransition Layer Count: 5 TransitionType: LinearWaiting Mode During Printing: Resting TimeRest Time Before Lift: 0 sRest Time After Lift: 0 sRest Time After Retract: 0,5 s

or

• Quality:layer height = 0.2 mm• Infill:density = 15 %• Material:temperature = 220 ºCplate = 50 ºC• Speed:print speed = 200 mm/s (K1 Max / K1 / K1C)• Support:structure = treeplacement = touching build plate