3D model descriptionA 3D model pack inspired by the Knights of Ren characters Ap'lek, Cardo, Kuruk, Trudgen, Ushar, and Vicrul from Star Wars, in the style of vintage Kenner toys.

3D printing settingsSlicer Software: CHITUBOX V1.9.3Layer Height: 0,05 mmBottom Layer Count: 8Exposure Time: 2,5 sBottom Exposure Time: 80 sTransition Layer Count: 5 TransitionType: LinearWaiting Mode During Printing: Resting TimeRest Time Before Lift: 0 sRest Time After Lift: 0 sRest Time After Retract: 0,5 s

or

• Quality:layer height = 0.2 mm• Infill:density = 15 %• Material:temperature = 220 ºCplate = 50 ºC• Speed:print speed = 200 mm/s (K1 Max / K1 / K1C)• Support:structure = treeplacement = touching build plate