Tradition speaks of quiet moments when a simple gesture offered comfort. A raised hand, a gentle gaze, and the steady calm of someone who carried peace wherever he walked. This statue captures that moment. The figure stands barefoot on a round base, dressed in flowing robes, with one hand lifted in blessing and the other resting near the waist. The pose reflects humility, presence, and compassion.

The sculpt focuses on clarity and calm expression. The facial features are gentle and composed. The hair and beard carry soft definition. The robe falls in layered folds, with subtle tension at the belt and natural weight along the lower hem. The feet rest firmly on the base, giving stability for display or tabletop use. From the front, the blessing gesture reads clearly. From the side and back, the flowing garment and quiet posture create a clean silhouette.

This figure works as a devotional statue, a centerpiece for a shelf or altar, or as a painting project for hobbyists who enjoy soft fabrics, skin tones, and natural lighting. The neutral shape prints well at multiple scales, from small desk models to larger display pieces.

This model is based on an original concept and design. The initial 3D form was generated with the assistance of AI tools, after which it was extensively refined and manually detailed in Blender and other 3D editing software. This workflow ensures the figure maintains its unique character and meets the standards of precision, structure, and print-readiness required for high-quality 3D printing.

Please note that the model is primarily designed for textured versions (OBJ + MTL in ZIP archive), allowing for a rich and visually detailed result when used with color-supported 3D printing or digital rendering. The non-textured version (STL, 3MF) may lack some surface details visible in the textured formats. The formats included are STL, OBJ, MTL, 3MF, FBX, and BLEND inside a ZIP archive, along with separate OBJ and STL files for the platform’s 3D viewer.

Technical features and printing recommendations

Recommended print technology

Resin printers for clean surfaces on the robe, hands, and face.

FDM printers with careful supports for drapery and raised hand.

Suggested resin settings

Layer height: 0.05–0.08 mm.

Hollowing with 2–3 mm wall thickness and drain holes beneath the base.

Light supports under the lifted hand, sleeve edges, and hem folds.

Suggested FDM settings

Layer height: 0.12–0.16 mm with a 0.4 mm nozzle.

Two or three perimeters and 14–20% infill.

PLA for easy printing or PETG for warmer environments.

Supports for the hand, robe overhangs, and back of the garment. A brim improves adhesion.

Orientation and supports

Print upright on the base for best structural stability.

For resin, angle slightly to reduce large peel surfaces and improve surface consistency.

Clean support marks gently, especially around the hands and sleeves, before priming.

A typical print around 160–200 mm tall takes about 7–10 hours on a resin printer with roughly 100–150 ml of resin, depending on hollowing and supports. On an FDM printer, expect 9–12 hours with roughly 120–170 g of filament.

Scaling Note: This model is designed in millimeters (mm). If it imports unusually small, set the slicer units to mm. If the slicer defaults to meters, scaling up 100x restores intended size. The figure scales well for larger display statues, though very small scales reduce facial detail and robe texture.