Basic Mars doll body(head not included)Comes with 1 pair of hands and blank bulge piece.Elbow, wrist, knee, ankle joints are hinged ball joints and are removable while torso, shoulder, neck, and hip joints are strung like BJD.Recommended printing with DLP resin printers using ABS-like resin for extra toughness.Print body parts at 100% scale, hinges at 95-96% and pegs(not including neck peg) at 92-93% to ensure that the joints won't be too tight.Assembly instruction:
- String neck peg, chest, torso, upper arms, thighs together.
- Assemble the hinges to the joints and securing the hinges with designated pegs(each hinges and pegs are different sizes according to where they are supposed to be) apply some oil/lubricant to the hinge if the joint is too tight.
- Inject hot glue to joint cavities, wet the contact point of the hinge, then push the tip of the hinge in, wait until the glue cools down then gently rotate the joint around to loosen it, make sure to do this one by one as hot glue cools pretty quickly.
- Glue magnet to torso and bulge piece.
Do not modify, kitbash, or resell files without permission
