3D Printable Dragonslayer 3D print model

Based on the iconic weapon from the Berserk manga, this model is cut into several STL files for a 3D-Printable prop that is almost just too big to be called a sword. Too big, too thick... You get the idea. This was made with the intent to be printed and assembled as a highly accurate and detailed prop, perfectly suited for anything ranging from cosplay to gifts to wall decoration! The assembled product measures roughly 72" from tip to pommel, and I would recommend a minimum printer built volume of 256mm x 256mm x 256mm in order to print it at 100% size.

Includes:

• Eight STL files for printing one massive sword
• Additional .obj and .fbx files containing all parts

This print is meant to be assembled using dowel rods and glue. You will need two (2) 48x 1 rods, and one (1) 48x 2 rod. Simply slide each rod into holes along the build, and use a filament-appropriate adhesive to seal everything together.

A lower infill density (15-20%) along with thicker outer walls for the blade pieces is ideal for avoiding a very heavy prop.

Supports should only be necessary for the chain link and hilt pieces.

Enjoy! :)