Set of doors 3D model

Name: Set of doorsType: modelFormat: 3Ds Max 2017Export: OBJRender: Corona (9) Vray (4.x)Polys: 679248Verts: 343802Units: MillimetersDimension: 900 x 380The LOFT leaf door is filled with a single safety or tempered glass panel with a thickness of 6 mm, available in three color variants (transparent, graphite and satin glass). The glass is installed with glazing beads. The frames of the LOFT door and wing are made of single-chamber steel profiles with a wall thickness of 1.5 mm. The profiles are cold, without a thermal barrier. The frame of the door and wing are powder-coated. Every LOFT leaf door is produced according to custom dimensions. Depending on the needs, the door is available in single or double leaf versions.The door LOFT is installed in an opening, through holes in the frame or with the use of anchors. 4 types of seals are installed along the entire inner and outer door frame and wing frame perimeter. LOFT door does not have a steel sill (a brush seal is installed in the lower wing’s profile). As standard, the door is equipped with a black handle with insert and flush bolt (only in double-leaf door).https://gros.pl/en/article/loft-steel-door