This 3D model was originally created with Sketchup 8 and then converted to all other 3D formats. Native format is .skp 3dsmax scene is 3ds Max 2016 version, rendered with Vray 3.00 Argo architects presents a design for an intercontinental maglev train, which travels at supersonic speed through a vacuum tube. The magnetic trains can thereby reach a speed of over 3000 km/ h. Thus, the Paris-Washington takes only about 3, 5 hours. Maglev routes are mostly on land and traverse the oceans only to the shortest routes. On the USA- Europe route, for example, the longest water transverse end section is only about 500 Km long. The magnetic levitation drive automatically. In normal operation, the modules are not entered, only for maintenance purposes. The energy needed to power the system is supplied by wind energy. Huge towers contain batteries, gastanks for immidiate refill of oxygen to the vactubes and the vacuum compressors. Technically, this concept is realistic but economically, is much too expensive. PLEASE RATE!