Dualsense and more controllers stand with led design. It looks great with lights and be different with your plates.

Tested with dualsense, razer, logitech.

Includes;

• case.stl
• case_cover.stl
• case_covers_plate.stl
• holder.stl
• holders_cover.stl
• 9 logos (.stl)

If you want different logo design, contact me.

Print SettingsAll parts made with same settings.It would be fine to change your settings for your printers potantial.No supportNo raftYou can use brim or skirtSlow print if you have sticking problem with your built plateFor high resolution, you can change Layer HeightPrinter : Two Tress Bluer / PLA

Layer Height : 0.3Initial Layer Height : 0.2Line Width : 0.3Wall Thickness : 0.6Wall Line Count : 2Print Speed : 50 mm/sInitial Layer Speed : 20 mm/sSkirt or Brim Speed : 20 mm/sPrinting Temperature : 200 CBuilt Plate Temperature : 60 CInitial Layer Line Width : %150Infill Density : %10