Knitted Toothless 3D Printable 3D print model

This is a Cute Knitted Toothless, Multicolor, Ready for 3D Printing. You can resize as you need in Slicers.

Recommended Printing Details

• 0.1 - 0.2 Layer Height (Depending on the quality you want).
• 2 walls.
• 15% Grid (or Cross Hatch) Infill.No Support Needed.
• Adaptive Layer Height recommended (But will slow print down).
• Tested down to 80% of its original size on a well-calibrated printer.
• Make sure you have good adhesion. Slow down the initial layer & infill speed.
• Pre-Cinfigured 3MF file is included. Just Download>Slice>Print