*Celebrate Christmas with this adorable & functional Santa Claus! *

Looking for a unique Christmas decoration that is actually useful? This Stylized Santa features a wide-open mouth designed to hold your everyday essentials. It's perfect for keys, coins, AirPods, candy, or even small office supplies.

Files Included:Full Body Version (160mm): Optimized for standard printers.Split Version (210mm total): Divided into two parts (Base & Body) to allow for larger printing on standard beds and easier painting.3D printing settings

FDM (Filament) SettingsMaterial: PLA (Matte PLA is recommended for painting).Layer Height: 0.16mm (recommended for better face details) or 0.20mm.Infill: 10% - 15% (Gyroid or Grid pattern is sufficient).Walls/Perimeters: 3 Walls (This allows for aggressive sanding without breaking through).Supports: Required.Type: Tree Supports are highly recommended.Placement: You will need supports mainly for the upper lip/mustache overhang and under the nose. Tree supports will be much easier to remove from inside the mouth.Orientation: Print upright.

** Resin (SLA) Settings**Layer Height: 0.05mm.Hollowing: Essential. Do not print solid.Wall Thickness: 2mm - 2.5mm.Drain Holes: Add 2 large holes at the bottom of the base to release suction and uncured resin.Orientation: Tilt the model back approx 15-20 degrees to minimize layer surface area.