Experience the most deadly RPG encounter of all time in full 3d plastic glory on your tabletop:

The Bridge

Carefully cross a raging river, enter into a forbidden kingdom, or duel to the death on this versatile viaduct.

This completely modular 7 piece bridge set is simple to print, tested, and customizable (see images)

• Conservative sized pieces are designed for compatibility with smaller resin printers
• Print a variety of parts and adapt the bridge to any length you need
• Robust connections, when handled with care, provide easy assembly/disassembly

• A 2 part stair/ramp includes small bumpers to hold minifigs in place on the incline

• Universal footings interlock into the column archways, aligning to a 1" grid

• Connection pieces provide a cost effective way of adding length without extensive printing. Choose from Short, Long, or Broken connections

• 1" spaces are clearly marked, and assembly seams align with natural stone mortar joints

Included: 7 STL files and 7 pre-supported Chitubox files

No need to mirror any files - all pieces are design to interlock as modeled

Printing Tips:

• Be gentle when assembling. Ensure the parts are aligned and work them together/ apart slowly
• With all 3d printers and resins, tolerances can vary with assembled models
• Chitubox files with supports are provided for convenience, but may not be suitable for every 3d printer. Files are over-supported to lower chance of failure
• After printing, carefully test interlocking connections
• Connection too tight? Lightly sandpaper a few sides, assemble the parts, then spray primer to avoid adding thickness to masked connections
• Connection too loose? Add 1 or 2 coats of primer to thicken up the joints

Print photos created from an Anycubic Photon, .025mm layer height

Enjoy!