This model was created to be printed on an SLA (resin) printer. It could be printed on an FDM printer at a larger scale.

It could also be textured and used in 3D applications.Includes STL, FBX, and OBJ files.

It is designed to be printed in 10 prints (Core1R and Core1L, and then Roof1, Roof2, and Roof3 twice each). I recommend rotating each roof section 30-45 degrees inwards (so supports print on the inside) and printing with supports.

Dimensions of the assembled model at full scale:W: 10.05 cm (3.96in)L: 11.22 cm (4.42in)H 10.10 cm (3.98 in)

Can be printed in pieces on any compact SLA printer.

If you are struggling to print section RoofR with the columns, There is a variant of it without columns. You can add toothpicks or dowels to the model instead when you assemble it.

If you have any questions or issues with this model or would like it divided in a certain way, please let me know and I would be happy to assist.

Thank you,Dynamosaurus