Commercial License:You can print and sell this model. The model can be worn and can be also used as a mini home decoration.UnisexWearable modes:

1. Devil Pendant: The bail is easy to host chains up to 5mm diameter beyond that you can use a jump ring.
2. Devil Badge: The rare side has two rings, where a safety pin or a pin can be used to pin it to your dress.

video link: https://www.youtube.com/shorts/Huxjxa-gW3o

complete collection link:

https://www.cgtrader.com/3d-print-models/jewelry/pendants/plant-pot-pendant-and-badge-collection-5e2bc4ef-aa07-4f39-9fa0-2f37db1ab91c

3D printing settings:

Printer: FDM / RESIN,

Filaments: PLA, PETG, ABS, E.T.C,

Retraction: 3mm speed 25,

Nozzle Temp: minimum 190 to 210 C bed 90 C for PLA (no glue stick/adhesive needed)

Infill: Minimum 5%,

Print in place,

Support: No supports needed, if necessary, turn on make overhang printable.

Ignore watertight error,

Layer height: lower the layer height higher the details, the current print pictures in the model printed at a layer height of 0.08mm with 0.4mm nozzle took around 1 and half hour to print.

Build plate adhesion: brim at least 5mm,

Thank you,Have a nightmare.

Regards,Sigma Designers.