The scale of this STL as provided is roughly 70mm tall, 125mm x 146mm footprint, although in your slicer you may wish to increase or decrease the scale for your needs.

There are four files provided. This model file is not intended to print complete as is, and will require adhesive to join the Shed Roof to the Main Building. You may decide to reassemble and slice as a complete file yourself and for that purpose an additional file is provided so that you can create a custom slice for your own settings and assembly needs. It is my experience that the best and most natural results are obtained by joining the Shed Roof to the Main Building as a final assembly step.

The interior is built up at a 50 degree ramp to ensure easy cantilevered printing with no supports. For this reason the external side door and side windows are false and for visual effect only.

Ranch Animal Shed.STL- Shed Building and Shed Roof are provided seperated and nested as a single STL file.

Ranch Animal Shed - 1.STL - Shed Building and attached Outdoor Pen are provided as a single file. This file should only require supports for one gable end door and two gable end windows. The side windows are false and will not require any supports. The Shed Roof is separated from this file (negated).

Ranch Animal Shed - 2.STL - Shed Roof alone is provided seperately for printing.

Ranch Animal Shed Complete.STL - Complete assembled building with no provisions or planning assumed. You will have to decide how to slice and orient this file to minimize supports and warping.