Vase model MW19081 3D print model

3D printable vase model designed with Fusion 360 and Dynamo Studio. You can download all four models have different height. (For information about size, refer to the drawing images above.) So it can be used for various purposes.

Since it was originally designed in a shell-free form, you should set your own “Wall and Bottom Thickness” at slicing program. Caution! The “Top Thickness” must be set to zero. Only then can the hollow vase model be printed. See the above images and linked YouTube video. And it can be freely scalable.

== Slicer Settings ==

Layer Height, Wall and Bottom Thickness : Set up for your purpose / Top Thickness : zero / Infill : zero / Support : no / Build Plate Adhesion : probably no