Baseplate and risers for the affordable Koorui Computer Monitor series popular on Amazon.The baseplate is designed to accept the 1risers from the other file that can be easily snapped in/removed allowing you to easily adjust height preferences and stabilize your monitors in different rooms.This baseplate will for sure accept the 24 model of the Koorui Computer Monitor however I HAVE NOT tested the other versions such as the 22or 27 (E2212F & E2711F). I firmly believe they use the same mount with the same dimensions but I suggest running a quick measurement then cross referencing my file before you trust me. Please leave a comment for others if it works on the other models.Printing Notes: • Suggest MINIMUM 10-15% infill for peak structural integrity. My print held up very well at 15% however was filament intensive. I believe I used somewhere near 1,400g for 2 baseplates and 10 of the 1risers at 15%.Strategy: • Quickly check dimensions on your monitor stand base width if NOT using the 24 version just to make sure it will fit. • Print the BASEPLATE first make sure your monitor will fit in snug • If for whatever reason you decide to scale the baseplate, make sure you scale your risers accordingly as well...Please let me know if you end up trying this with the 22, 27, etc. models and if it fits well in comments. Good luck and let me know if there's any problems and I'll tweak it accordingly.