Chinese architecture21-28 3D print model

Format - Stl and obj

Quantity: 8 pieces

The model is designed for 3D printing. For fans of Board games.

You should understand that the print quality you get depends on the system you use. All our high-resolution files allow you to get excellent results on high-end SLA machines. While the same 3D models will be produced with lower resolution on standard FDM printers. Nevertheless, the 3D models have passed the necessary pre-printing test and have been pre-tested on SLA and FDM printers. We received a satisfactory performance and were satisfied with what we did especially for you.

If you want to achieve the highest quality 3D printing, we recommend using SLA printers with a layer height parameter of 60 microns. We will try to divide our 3D models into prefabricated elements so that our 3D models can be printed on printers with a small print area. Large parts require a minimum of 220*220*250mm. Which is the approximate standard for the famous entry-level 3D printer Ender-3. 3d models are tested and cut using absolutely free software Cura. We recommend this program because it is available to everyone, time-tested and proved to be a professional tool for working with 3D models for 3D printing. You can count on our support!

You should understand that the print quality you get depends on the system you use. All our high-resolution files allow you to get excellent results on high-end SLA machines. While the same 3D models will be produced with lower resolution on standard FDM printers. Nevertheless, the 3D models have passed the necessary pre-printing test and have been pre-tested on SLA and FDM printers. We received a satisfactory performance and were satisfied with what we did especially for you.

If you want to achieve the highest quality 3D printing, we recommend using SLA printers with a layer height parameter of 60 microns. We will try to divide our 3D models into prefabricated elements so that our 3D models can be printed on printers with a small print area. Large parts require a minimum of 220*220*250mm. Which is the approximate standard for the famous entry-level 3D printer Ender-3. 3d models are tested and cut using absolutely free software Cura. We recommend this program because it is available to everyone, time-tested and proved to be a professional tool for working with 3D models for 3D printing. You can count on our support!