A cute refrigerator magnet where you can place photos of your babies.

• Using the photo cutting template provided with the model file, center the area you want to display and trace the outer frame of the template with a pen.

• Then, cut the photo with scissors and insert it into the channel on the back of the object.

• There is a 20mm diameter and 2mm deep magnet slot on the back of the object. Glue your magnet into this slot. (I recommend using liquid silicone. It ensures no separation.)

• Now, you can place your baby’s bottle wherever you like.

**Suggested Printing Parameters:

For Resin Printers:**Default parameters should be enough

For Filament Printers:

Nozzle: 0.4 mm Layer Height: 0.12mm Wall Number: 3Bottom Layers: 4Top Surface Layer: 4Top Surface: MonotonicInfill: 15% GyroidRetract at Layer ChangeDO NOT use support !

Dimensions: 40x20x90 mm (1.6x0.8x3.5”)