A stylized crooked witch-house bookend. The house structure is fully hollowed internally with built-in openings for light to shine through the windows.

Three model versions are included:

Hollow solid version (no electronics)

Tealight slot version (fits standard LED tealights)

Bambu LED Kit 001 version with a slot and cable channel

The bookend stands securely on a wide base, suitable for shelves, desks, and reading corners.

Measuring Instructions

If you want to resize the bookend:

Decide your preferred height for your shelf or book size.

Scale uniformly in your slicer to reach that height.

Light openings and slots go off if scaled.

Printing Tips

Organic Supports

Layer height: 0.16–0.28 mm works well.

Print with 2–3 walls for good strength on the tall tower and roof details.

PLA or PLA+ recommended; PETG if placed near a warm light source.

Finishing & Lighting Tips

Dry brushing highlights roof shingles and stone textures.

Matte greys, off-whites, and mossy greens give a classic “witch cottage” look.

Insert a standard LED tealight to create glowing windows.

For the Bambu LED Kit 001:

Feed the cable through the rear slot.

Seat the LED plate inside the cavity.

Add rubber feet for stability.