Some parts such wood screws (3x16mm) or screw (M3x8mm) must be purchased. Printed parts are in format stl.Also consider using for a nice product look by using setting Fuzzy skin.To be used by designers and craftsmens.

Product dimensions:Width overall drawer 230 mm (9.055 Inch)Primary Overall height 22 mm(0.858 inch)Customize your request for height according to your needs 47 mm(1.849 inch) or 97 mm(3.818 inch)Depth 186 mm (7.306 inch)

This assembly is very suitable for the model Pedestal under the monitor.

If you want to see the current version of the assembly instructions, you can find it here :

https://www.cermy.cz/BuildGuide_Under_Desk_Drawer_(Copacetic).pdf

Settings in prusa slicer: Prusa PLA or PET-GRafts:NoSupports: NoResolution: 0.15mmNozzle 0,4mm

also consider using for a nice product look:Fuzzy skin: Outer wallsFuzzy skin thickness : 0,1 mmFuzzy skin point distance : 0,2 mm

Let me know if it got useful! if you have any kind of problem, just let me know! i will try my best to help with it!!Thanks in advance!!!