A modular piece of furniture designed for wooden bars with a diameter of 10 mm and plywood sheets with a thickness of 5 mm.

You can stack the furniture on top of each other.

No need for tools.

On this model, the 12 wooden bars measure 30 cm, which induces 6 trays of 30.5 cm side by side.

you can refine the adjustment of the bars by playing on the scale.

3D PRINTING SETTINGSExtruder: 200°C and bed: 55°C

Layer height: 0.2 /0.3 mm

Vertical hulls, perimeter: 3

Horizontal hulls, solid top layer: 3 and bottom layer: 3

Filling density: 20%.

necessary corner supports

Speed perimeters: 30 mm / s