This listing includes high-quality STL files for a modular mold cavity system. Instead of using messy cardboard or makeshift boxes, this 3D-printed housing provides a rigid, reusable frame specifically contoured to the design. This minimizes silicone waste and ensures a perfectly leveled base.

Key FeaturesModular 4-Piece Design: Includes a keyed baseplate, two interlocking side walls (labeled 'A' and 'B')and Design File

Alignment Keying: Built-in registration tabs ensure the walls lock into the baseplate perfectly, preventing leaks and keeping your mold symmetrical. ( Use glue gun for better locking at joints of walls and base )

Optimized Cavity: The internal geometry is specifically swept to follow the bear's unique profile, reducing the amount of silicone required while maintaining wall strength.

Professional Results: Designed for a top-pour method, resulting in a flat, stable bottom for your finished candles or resin pieces.

What’s Included?Wall A STLs and OBJ, Wall B STLs and OBJ, Baseplate STL and OBJ, Design STL and OBJ.

Instructions for UseAssembly: Align the registration tabs on Wall A and Wall B with the corresponding slots on the Baseplate. Ensure the fit is snug.

Sealing: For a 100% leak-proof experience, apply a thin bead of hot glue or clay along the exterior seams where the walls meet the base.

Prep: Place your Cute Bear master model into the center of the cavity. Apply a high-quality mold release agent to all internal surfaces and the bear model.

The Pour: Mix your platinum or tin-cure silicone and pour slowly into the top opening. The contoured walls are designed to minimize air pockets and save on material.

De-molding: Once the silicone is fully cured, simply pull the interlocking walls apart. The modular design allows the housing to break away without damaging your new mold.

Thank you