A modern ribbed pitcher designed for high-quality 3D printing.This sculptural pitcher features a clean Scandinavian silhouette with vertical ribbing that enhances grip, hides layer lines, and gives the object a ceramic-inspired appearance.

The model is optimized for FDM printing and designed to be water-tight when printed with the recommended wall thickness and perimeter settings. The form works beautifully as a decorative pitcher, vase, or functional water jug.

Dimensions (100% scale)

Height: 160 mm (6.3 in)Bottom diameter: 120 mm (4.7 in)Top diameter: 100 mm (3.9 in)Wall thickness: approx. 2.4 mm (0.094 in)

Capacity

Holds approximately 1.2 liters at 100% scaleCapacity will change if the model is scaled

Recommended Print Settings

Nozzle: 0.4 mmPerimeters: 3–5 walls recommendedWall thickness: approx. 2.4 mmInfill: 5%

Material: PLA or PETG

Do not print with fewer than 3 perimeters, as this may result in weak or non-watertight walls.

When printed with at least 3 perimeters, the pitcher is water-tight and suitable for holding water.

Scaling Guidelines

The model can safely be:scaled down to 80%scaled up to 150%

When scaling:

Always ensure a minimum of 3 perimetersIncrease perimeters accordingly when scaling up

Notes

This is a digital STL file for 3D printing.No physical product will be shipped.

Due to the nature of FDM 3D printing, minor surface variations are normal and part of the design’s character.