3DPrintingSettings Your printer, materials and printing conditions are unique to you, and due to these widely varying aspects you will know what settings work best for your printers. However, we have included a quick reference guide below that we found worked best for us: ● Material:The design was tested and designed to be printed in PLA, however other materials may also be possible. ● LayerHeight:0.2mm ● Perimeters(Wallloops):3 ● Infill: 20% ● Supports:No ● Orientation:Each file has been pre-orientated for optimal printing. ● BedAdhesion:Westrongly recommendusing abrimorraft for the print as the edge of the stocking and Santa have small surface areas on the build plate. ● ReadytoPrint:A ‘Ready to Print’ .3mf file is included with our preferred settings for effortless printing on Bambu Lab printers. (The model has also been pre-painted in Bambu Studio for easy multicolor printing). AdditionalNotes: ● Thereisa.stl file labelled ‘Santa Stocking Surprise (Brim)’- this file contains abuilt-in brim if you have difficulty printing with the brim in your slicer