This 3D model staff is a must have for your Golden Guard cosplay!

The staff comes in several pieces for easy printing and assembly:

• Gem (Will have 2 versions, a solid and hollow)
• Base
• Wing
• Connection Pin
• Coil
• Bottom Stopper

Files are in .stl format.

NOTE: pipe in pictures not included in model files

The gem piece has both a solid and hollow version, in case you want to add lights!

The wing is connected to the base through two 1/2x 1 1/2 wooden dowel pins that I got from Home Depot here: https://thd.co/3AX2Fjl But I have also included a 3D printable connection pin that you can use instead.

Staff fits onto a 1 inch OD (outside diameter) pipe.

NOTE: When buying PVC pipes, diameter measurements refer to the ID (inner diameter), so a 3/4PVC pipe will get you a 1 outside diameter (this is what I used.)

Files for personal use only. Any commercial use is strictly prohibited. Resale or redistribution of these files in any way, shape, or form is strictly prohibited. The selling of this model as a printed object is strictly prohibited.