A quick and easy to make project. Father Andersons bayonet from the anime series Hellsing. can Print Blade file 02 as many times needed to make desired length. Would suggest scaling up if you wish to make the blade longer than 50cm as it is flimsy

When printing recommend printing all blade pieces horizontally with the blade edge facing up and file named 'Rod' to also be printed horizontally for strength reasons. Handle can be printed Vertically with little to no support, depending on the printer.Clean all edges and watch out for any bulges or excess of material build up, as this will affect pieces fitting together. There is a 0.5~0.6mm clearance between the pieces, so they should slot together easily and hold place.