For a new printer (that uses Anet parts) I made this Enclosure for the display. It makes it into a Hand held Controller.Because this the Anet A6&A8 are owned by many people, somebody somewhere on the Internet must be able to use this Enclosure also.It consists out of two printed parts. For the back (printed in black PLA, see photos) there are two types: one with, and one without a cutout for the leads of the LCD that stick out at the back. If you choose to print the one without this cutout, you will have to cut these leads a bit shorter to make it all fit.You also need 4 M3x20mm bolts and 4 M3 nuts.

This model is FDM tested with a 0.2mm resolution and a 0.4mm Nozzle. The silver/gray is ABS and the Black is PLA

If you have any questions feel free to ask them :-)