19G WIRELESS MOUSE MOD MADE FOR VIPER V2 PRO PCB READ DISC 3D print model

! THIS IS JUST THE STL FILE FOR ANY 3D PRINTER !

Please make sure to use lightweight material or else the 19g goal might not be met. For my personal version i used a resin 3d printer with lightweight resin.

IM SELLING THE FILE BUT NOT THE RIGHTS TO RESELL OR CLAIM THE PRODUCT AS YOUR OWN (you are allowed to edit the file/3dmodel for personal use)!

If there are any questions or you would like to get diffrent contact points for the mouse grip feel free to DM me.

The 3d shell was made to use COREPAD Skatez PRO 205 Replacement Mouse Feet for SteelSeries Aerox 3 Wired / Steel Series Aerox 3 Wireless which you can buy on amazon (https://www.amazon.de/-/en/dp/B08Q46Y7PX?psc=1&ref=ppx_yo2ov_dt_b_product_details) for about 9$.

By buying this product (STL file) you agree that this is a non refundable purchase.

How to use the STL file:

Make sure to add plenty of supports for the overhangs (mouse buttons)

Make sure to downscale the .stl file to 10% of original size (VERY IMPORTANT)

3D PRINTING SETTINGS MAKE SURE THE SCALE OF THE MODEL IS :

(downscale the model to 10% of original size)

X: 65mm

Y: 73.7mm

z: 21mm

i used a resin 3d printer so my settings might not work for you so make sure you use whats best for your printer.

my settings:

0.02mm layers 2.1sec exposure time 5 bottom layers/with 25 sec exposure time (this only matters for resin printers)