Easy-to-print car model kit in scale 1:43 for self assemblyFDM 3D-printable with standard settings
Attention! Steel axles with a diameter of 1 mm need to be ordered separately!
Print settings:Print settings depends on your printer.For this model TPU plastic was used for tires and PLA for all other parts
Recommended 0.4 mm nozzle 0.2 mm layer height
Assembly notes:
- Remove supports accurately
- Drill all holes with 1 mm hand drill
- Use 1.2 mm drill for axle holes in car body
- Cut the axles in this length: 4x15 mm (side doors); 3x39 mm (roof doors); 2x38 mm (wheels); 2x5mm (front door)
- Assembly all doors and parts together. Don't bend the axles!
- Glue the windows and tank door on the car body
