Originally designed character from my childhood sketches.

3D model description

This is an action figure very easy to print, its pre-assambled. All you need to do is just need to slice and print.important to print with character laying down on his back.

I added other files for Resin and for FDM printers

(Filament Printers). Its the same character but with a fist.

you can use Act BW V4.5 & ACT BW V5.3 15cm Resin for Resin printers.And for FDM printers use ACT BW V5.2 FDM 15cm

The action figure painted in black is in resin, the 4.5 verion with open hands. The one with fist is the version 6.0 resin

The white action figure is the filament action figure.3D printing settings

I tested the files with both resin and filament printer and they work perfect.

Resin:I used the anycubic m3 with elegoo water washable resincharacter laying down importantwith supportswhen print is ready leave soaking in water/alcohol for at least 4 hours so you can easily remove supports without damaging the print.

FDM:I used the Creality Ender s1 plus, in my opinion the ender in the most accurate and reliable printer i ever used.

for better detail on character i used the 1.6 layer height(recomended).

Layer Height: 1.6wall thickness: (minimum for endurance) 1.2mminfill: i used 20%speed: 45 mm/sinfill speed: 75mm/ssupport overhang angle: between 45-65 (i used 65)support desnity: from 1 - 12 ( i used 8 on my ender, so it will be easier to remove supports without damaging print)