Daffy Duck posing standing 3D print model

Daffy Duck posing standing and pointing forward with his index finger and frowning eyebrowsThe design is 10 cm high and is scaled 200% large, you can scale it to the size you want since the parts are cut so you do not have printing problems, I show you some photographs of how I placed the figure to print with the Cura slicer, depending on your experience you decide how to send it to printSince the figure is going to be painted black, minor cuts were made so that there were not many pieces. The cut that was made on the head was designed for a good grip with the body, which is why it was decided to stick that part to the body.There are a total of 5 files with a 3mf extension since it has a better resolution and you can open it with prusaslicer or curaQuality: 0.2 for the body and 0.16 for the restI recommend 5 walls so that it does not breakUpper and lower 5 tooStuffed; Don't skimp here, I suggest 100% for the legs and head and 80% for the body,Supports: Yes, I leave you some images so you can see that I added some extra supports, including the tree one, so that it has a better grip, but it's up to you to decide.Adhesion: yes border 12 linesPato Lucas posando de pie y señalando hacia enfrente con el dedo indice y con las cejas fruncidasEl diseño es una medida de 10 cm de alto y se escalo a un 200% en grande, tu lo puedes escalar al tamaño que desees ya que las partes están cortadas para que no tengas problemas de impresión, te muestro unas fotografías de como coloque la figura para imprimir con el slicer de Cura, según tu experiencia tu decides como mandar a imprimir Como la figura va a ir pintada de color negro, se le hizo los cortes menores para que no fueran muchas piezas, el corte que se realizo a la cabeza esta pensado para un buen agarre con el cuerpo por eso se decidió en esa parte pegado al cuerpo. Son en total 5 archivos con extensión 3mf ya que tiene una mejor resolución y lo puedes abrir con prusaslicer o cura