BATMAN SUPER POWERS ULTIMATE It is a sculpted figure from scratch (disclaimer: it is not a toy scan; this clarification takes place since this model it is a sculpt based on a popular line of toys from the 80s) retro-vintage tribute to 3D printing. The scan of action figures are usually defective and present problems of definition and lack of detail (not to mention the loss of joints), so I bring you a completely sculpted figure from scratch with great definition and detail, respecting the shape and style of this vintage action figure.

Features:-Retro vintage 4scale, 5 points of articulation figure.-2 pairs of interchangeable arms.-Cape.-2 pairs of interchangeable legs.A pair of unjointed legs (namedBatman_Staction L LegandBatman_Staction R Leg") for those who wish to print the entire leg without knee joints.-Base (logo shape).

Joint inserts may require dremeling and/or sanding before assembly and gluing. Resin printing is recommended for best definition.

In the case of needing it, I use my own figures scans (see image) as a size reference, although these are not part of the final model.

Reselling these 3D model is not allowed. 3D Forge is not responsible for any breach of this license. By purchasing STL files from 3DForge, you agree to the full terms of this license agreement. 3DForge has no responsibility for any damage that may occur using these files or their 3D printed derivatives. 3DForge is not responsible for providing technical support for the use of STL files.

Model not pre-supported. The scale is approximately 4" (can be re-sized). For Resin (recommended) & PLA 3D printers.

The current version can be kept standing and there are a couple of alternative legs without knee joint in the case that someone wants to go to the simplest, without complications. It is likely that the great cape destabilizes the figure, so I have included the bat-logo base. The model is in a very decent state and has a definition much higher than a scan. The best results may be obtained by printing in resin and painting with airbrush, but it depends a lot on the custom artist skills (there are people who paint excellently with brush). For the chest bat-signal, it should be tested with some kind of decal or heat transfer or sticker (care that heat does not damage the filament or resin!). Obviously, if I find improvements to make in the future, there is always the possibility to update the model.