Batman Figure 3D print model

ABOUT THIS 3D MODEL

Batman 3D model for printing was created in ZBrush. The model is saved in STL files, a format supported by most 3D printers.

FDM version features:

• Contain 17 parts; Made with connectors;
• Made with a platform in the form of a part of Chrysler Building;
• Can stand on the surface without a platform;
• Cloak is fixed by the head;
• You can print cloak with flexible materials;
• All parts are divided in such way that you will print them with the smallest amount of supports.

SLS/SLA version features:

• Same as FDM but smaller and made as 2 parts.

All .STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.0.4. Software.

There are 17 parts for FFF/FDM version and 2 parts for SLS/SLA version. All parts of connectors should be printed at 100% infill.

Scale: His tall in life is 1880. Model made as 1/8 scale in FDM version and 1/16 in SLS/SLA version.

FDM version dimensions: After being printed will stand: 340 mm tall, 163 mm wide, 210 mm deep - with platform; 237 mm tall, 115 mm wide, 98 mm deep - without platform;

• Connectors should be printed at 100% infill to make them solid.

SLS/SLA version dimensions: After being printed will stand: 170 mm tall, 82 mm wide, 106 mm deep - with platform; 118 mm tall, 57.5 mm wide, 49 mm deep - without platform:

• Has only 2 details to keep printing costs down.