REDBULL Steering Wheel

This steering wheel is a replica of the Redbull Formula 1 steering wheel, it can be made entirely in 3D or it is possible to make the front and rear plates on aluminum or other materials, in fact, in addition to all the 3D files, the PDFs relating to the plates are also included.Below are listed the recommended materials for a successful job.

ELECTRONIC COMPONENTSpush button: https://cutt.ly/TwYooNOinextion display: https://cutt.ly/EwYopbrDLed strip 8Bit x2: https://cutt.ly/JwYopLWvWS2811:https://cutt.ly/pwYop4bdrotay encoder x2: https://cutt.ly/UwYoazaG or https://cutt.ly/9wYoamwJrotary switch x3: https://cutt.ly/6wYoaPHfmicroswitch: https://cutt.ly/zwYoaXaQElectroSeed SamD21 WB USB: https://cutt.ly/IwYoa5qP

SCREWS AND NUTS

--STEERING WHEEL--4x - Screw m3x10mm9x - Screw m4x45mm9x - Screw m4x45mm9x - Screw m5x20mm4x - Nut m39x - Nut m45x - Nut m59xThreaded Inserts - internal=4mm & external=5mm

-- PADDLE SHIFTER--2x - Neodymium magnet (size 10x2mm)2x - Screw m3x10mm2x - Screw m3x12mm1x - Screw m3x30mm5x - Nut m31x - Micro Switch

Good work!

3D PRINTING SETTINGSfor effective printing we recommend printing everything at 50% infill at a resolution of 0.2mm