This is a 7 piece dice set including d4, d6, d8, d10, d12, d20 and percentile dices.

Both SUPPORTED and NOT supported models are included for each dice. If you want to print all dices at once, there is an all in one file available.

By default, dice sizes are: d4 - 18mm, d6 - 16mm, d8 - 24mm, d10 - 24mm, percentile - 24mm, d12 - 20mm, d20 - 24mm.

These model are made for only 3D printing, and they are not optimised for any other use. If you want use it for other purposes and optimise it yourself, i can send .blend files.

I am using Anycubic Photon Mono 2 and i have printed all in one version with 110% size for sanding.All dices with supports took a little longer than 2 hours to print. The reason i printed at 110% size is after removing supports, edges of the dices are not perfectly smooth. To make edges perfectly clean, you have to sand every face and it makes dice a little bit smaller.Dices at the image are not sanded and i think they are usable even without sanding them. But if you want a cleaner look and more precise results, i suggest you sanding them.