This mask is a replica of Jetstream Sam's mask from Metal Gear Rising Revengance.

All of the larger parts can be printed at .3mm layer height and at least 20% infill.

The hinges should be .1mm layer height for strength and detail and 100% infill.

You can orient the parts depending on how fast you need to print them and the strength of the print.

If the jaw mounts aren't snug enough I made a slot above the ear for an elastic band to cross the top of the head to secure it that way.

I used my head as a reference to check the fit so you will need to scale every part up or down to fit yours.

How to measure: check ear-to-ear distance with the calipers provided and plug the measurement into this proportion:

6.5/100=(your measurement)/xor6.5x=(your measurement) x 100

When you put the mask on you should do it one half at a time.

Since everyone's head is shaped differently, if you run into any fitment issues, send me a message and I will make a google doc with the adjusted file.