Meet Weepy! A cute little creature with a heart full of emotions.

I printed Weepy without supports, but I recommend using a brim if you experience adhesion issues. If your printer can bridge long distances, you should be fine without supports. Otherwise, I suggest adding supports for the neck area.

I've included 3MF files with the paint applied, but since I don’t have an AMS or multi-material printer, I’m unsure about compatibility with other slicers (I used Prusa Slicer), so please let me know if these files work for you. You’ll also get two variants: one with eyes included and another with separate eyes. Plus, there's a keychain version.

Please note that the eyes may need to be scaled 1% up or down, depending on your printer settings and whether you plan to paint by hand like I did (layers of paint take up extra space).

Print settings that I used:Resolution: 0.30mmSupports: I didn't use supports but this will depend on your printer's bridging capabilities.Brim: Use brim if you have adhesion issues.Infill: 5%

Happy printing!

These models are for PERSONAL USE only.

Commercial Licenses - If you would like to sell prints of my models, please visit my other socials.