Meet Pizza Steave, a stylized 3D printable character designed for fans of quirky collectibles and cartoon-inspired figures. With exaggerated proportions, a confident pose, and a clean mesh structure, Pizza Steave stands proudly on a circular base—ready for display, painting, or gifting.

This model is optimized for resin and FDM printing, with pre-supported STL files included for plug-and-play slicing. Whether you're a hobbyist, collector, or designer, Pizza Steave adds personality to any shelf or showcase.

Technical DetailsFile Format: .STL (pre-supported), .OBJ, .FBX, .GLB, .BLEND

Printer Type: Resin (SLA/DLP) & FDM

Recommended Materials: PLA, ABS, PETG, Standard Resin, ABS-like Resin

Model Dimensions: ~95 mm tall × 60 mm wide × 60 mm deep

Layer Height: 0.12–0.2 mm (FDM), 0.03–0.05 mm (Resin)

Infill: 15–25% (Grid or Gyroid)

Supports: Required (pre-supported version included)

Estimated Print Time:

FDM: ~5–7 hours

Resin: ~3–4 hours

Finishing InstructionsFDM: Sand with 220–600 grit, apply filler primer, paint with acrylics

Resin: Wash in IPA, cure under UV, light sanding, then paint

Painting Tip: Use matte or satin finish for cartoon-style look; seal with clear coat

For visual assembly and finishing steps, you can create an interactive guide using Cadasio to help users follow along.

Safety & Usage NotesUse Case: Decorative only – not suitable for mechanical or load-bearing use

Child Safety: Not recommended for children under 12 due to small parts

Food Contact: Not food-safe – do not use with edible items

Resin Handling: Wear gloves and cure fully before handling