Spiderman Statue 3D Print Spider-Man figure 3D print model

THIS IS NOT A PHYSICAL PRODUCT. You will get a download link upon purchase.

Spider-Man as seen in the PlayStation 4 game, posing on top of an old building.

This model has been designed for 3D printing. You will need to glue the parts together unless you print the entire full model.

File format: STL

Level of detail: High

DISCLAIMER My prints are virtually tested in Cura with 0.10 mm layer height. Always have thicker walls than the standard setting to have some room for sanding & avoid fragile surfaces. Note that most of my models are non-modular; it means they're cheaper but require some additional work to glue the parts and cover seams with clay unless you print the entire full model. Other slicers than Cura have not been tested. There are a hundred different parameters that effect the outcome of a 3D print. This is the nature of 3D printing and I offer no support for the actual printing process. It's a difficult art to master, I've been printing for many years and it's still difficult to get good prints. Having to adjust angles of the model & sanding the print itself is a normal part of the process while making a statue like this.