Model optimized for 3D printing

Reg is a child-like robot suffering from severe amnesia. He is found by Riko on the shores of the Abyss, and is later taken to the Belchero Orphanage by her.

Hailing from the depths of the Abyss, Reg is completely immune to the curse of the depths. He is often referred to as an oddity of the Abyss, or an Aubade.

Parámetros de impresión 3DFDM Printing (Filament)

Most common material: PLA (also suitable as a base for PETG and ABS with minimal adjustments).

General Parameters:

Layer Height: 0.16–0.20 mm (fine detail) / 0.28 mm (fast)

Nozzle Temperature: 200–210°C (PLA), 230–250°C (PETG), 240–260°C (ABS)

Bed Temperature: 50–60°C (PLA), 70–90°C (PETG/ABS)

Print Speed: 45–60 mm/s (fine detail), 80 mm/s (fast)

Retraction: 0.8–2 mm at 25–45 mm/s (depending on extruder)

Cooling: 100% for PLA, 30–50% for PETG, 0% for ABS

Bed Adhesion: Brim or skirt (3–5 lines); Use glue or lacquer if it peels off.

Infill: 15–25% for standard parts, 50–100% for structural parts.

Shells/Perimeters: 2–3 walls (minimum 1.2 mm).

Resin Printing (SLA / LCD / DLP)

Most common material: Standard gray or beige resin (for modeling and miniatures).

General Parameters:

Layer Height: 0.03–0.05 mm (high detail)

Base Exposure Time: 25–35 s (first 5–8 layers)

Normal Exposure Time: 1.8–3 s (depending on resin and screen power)

Retraction/Lift Speed: 60 mm/min (up), 120 mm/min (down)

Ambient Temperature: 22–28°C (ideal)

Supports: Model tilt between 30–45°, medium supports in delicate areas

Wash: 90–99% isopropyl alcohol (2 min with agitation or ultrasound)

UV Curing: 3–6 min total (depending on color and curing power)